Skip to content
Tile, Clayton, NC

Tile in Clayton, NC

Tile is the most durable surface you can put in a house, and also the least forgiving of a rushed job. A crooked layout, a thin spot in the mortar or a floor that flexes underneath will show up as lippage, hollow tiles or cracked grout. We install ceramic, porcelain, glass and natural stone tile on floors, in showers and on backsplashes, and we spend as much time on the layout and the base as on setting the tile itself. The result is a surface you do not have to think about. Professionally installed across Clayton.

Tile installed in Clayton, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Clayton

Tile done right, the first time, in Clayton.

Homeowners across Clayton, NC call Southern Flooring Solutions for tile because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install tile across Clayton and the surrounding area, including Knightdale, Garner, Wendell, Smithfield. Financing available over 60 months on qualifying installs.

What's included

  • Ceramic, porcelain, glass and natural stone tile
  • Floors, shower walls, tub surrounds and kitchen backsplashes
  • Layout planned around the room's focal points and doorways
  • Large-format and wood-look porcelain installed on a flat, prepared base
  • First-quality product only, so extra tile can still be matched later
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Tile in Clayton

Built for Clayton homes.

Clayton sits on US 70 and I-40 about 16 miles southeast of downtown Raleigh, and it has been one of the busiest places to build in Johnston County. The 2020 census counted 26,307 people, up from 16,116 ten years earlier. Most new homes went up in places like Flowers Plantation and Riverwood, while the older blocks near downtown keep their Victorian and Craftsman houses. If you need flooring in Clayton, NC, we are just up the road in Garner.

Clayton is mostly a story about the last twenty years. The town counted 16,116 residents in 2010 and 26,307 in 2020, a 63 percent jump, and the reasons are plain: Raleigh is 16 miles away, I-40 and US 70 run right through, and the 10.5-mile Clayton Bypass opened in 2008. Out east along Highway 42, Flowers Plantation has been under development since 1986 on about 3,000 acres along the Neuse River. Riverwood, Glen Laurel around the Neuse Country Club, and Wellesley filled in much of the rest, and unincorporated areas like Cleveland and Powhatan use Clayton addresses too.

That means a lot of Clayton houses are now 10 to 20 years old, and the floors show it. Builder carpet wears in a path down the hall. Sheet vinyl in the laundry room starts to lift at the seams. Glen Laurel homes were mostly built between 2004 and 2018, and plenty of their owners are now on their second round of decisions. The common move is one continuous floor through the main level, usually luxury vinyl plank or laminate, so there are fewer transitions between kitchen, dining and living spaces.

Downtown is a different house. The Clayton Historic District, listed on the National Register in 2010, takes in 271 contributing buildings dating from about 1850 to 1959, mostly late Victorian and Craftsman. Older houses like these usually sit on crawlspaces. If the crawlspace is damp, a wood floor above it will swell in August and open up gaps in January. We look under the house and check moisture before we recommend hardwood, and where the original boards are still good, hardwood refinishing is often the better value than new.

New construction on slab brings its own question. Solid hardwood is not meant to be glued straight to concrete, so for a wood look on a slab we usually suggest engineered hardwood or a waterproof LVP. Either one also forgives the red clay that gets tracked in from a new yard that has not grown in yet.

Our Garner showroom is about 15 to 20 minutes northwest of Clayton by way of US 70 or I-40, and it is open by appointment. Since so many Clayton projects pair floors with a kitchen update, it is a good place to sit with our in-house cabinet designer and see cabinet doors, countertops and backsplash next to the flooring you are considering.

Recent work

Tile jobs near Clayton

  • Contemporary bathroom with marble tile walls and floor and a soaking tub
  • Minimalist living area with large-format gray porcelain tile
  • Spa-style marble bathroom with a freestanding tub, floating vanity and glass shower
  • Hotel lobby with patterned marble flooring and warm lighting
  • Bathroom with marble-look floor tile, white vanity cabinets and a freestanding tub
  • Walk-in shower with large-format marble-look wall tile and a built-in niche
  • Bathroom remodel shown before, during demolition and after: old tub surround removed and replaced with a new tiled tub area
Clayton FAQs

Tile in Clayton, questions

We want one floor through the whole first level of our Clayton house. What holds up best with dogs?

Luxury vinyl plank is the usual answer. It resists scratches better than most wood, it shrugs off water bowls and accidents, and it runs through kitchens and baths without separate thresholds. We will bring a few wear layers to compare at your estimate and explain the real differences between them.

Can we redo the kitchen cabinets and the floors at the same time?

Yes, and it usually goes smoother that way. Our in-house designer plans the cabinets, countertops and backsplash while we plan the flooring, so the floor goes in under the right footprint and nothing gets patched later. One team handles the whole job from start to finish.

Do you offer financing for a bigger project in Clayton?

We offer 0% financing for 12, 24, 36, 48 and 60 months with approved credit. The 0% plans do carry an additional cost, so we walk you through the terms before you sign anything. It is often used for combined flooring and kitchen remodeling projects.

Ceramic or porcelain: what is the difference?

Both are fired clay. Porcelain is denser and absorbs less water, which makes it the better choice for floors, showers and anywhere it may freeze. Ceramic is a little softer and easier to cut, and it is a fine choice for walls and backsplashes. In practice, most floor tile we install today is porcelain, and ceramic shows up more often on walls.

Can tile go over a wood subfloor above a crawlspace?

Yes, but the floor has to be stiff enough. Tile and grout do not bend, so a subfloor that flexes when you walk on it will crack them. Over a crawlspace we check for bounce and soft spots and use the underlayment the tile and setting materials require. Large or natural stone tiles need an even stiffer floor than standard ceramic.

Is tile too cold or hard for a family room?

It is harder and cooler than wood or carpet, which some families love in a North Carolina summer and dislike on a January morning. Area rugs soften it in living spaces. If you like the look of wood but want tile's durability, wood-look porcelain plank is worth a look, and luxury vinyl plank is a softer alternative we can show you side by side.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Clayton project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate