Skip to content
Kitchen & Bath Cabinets, Angier, NC

Kitchen & Bath Cabinets in Angier, NC

Cabinets are the biggest single decision in most kitchens, and they are the work we are asked about more than anything else. Southern Flooring Solutions plans kitchen cabinets and bathroom vanities with an in-house cabinetry designer, then installs them alongside your new floors. You choose the door style, the finish, the sizes and the pulls. We help you sort out what will hold up to a busy house and what fits the room, and when it is time for counters and backsplash, the same team handles those too. Professionally installed across Angier.

Kitchen & Bath Cabinets installed in Angier, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Angier

Kitchen & Bath Cabinets in Angier, done right.

Homeowners across Angier, NC call Southern Flooring Solutions for kitchen & bath cabinets because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install kitchen & bath cabinets across Angier and the surrounding area, including Fuquay-Varina, Holly Springs, Benson, Dunn. Financing available over 60 months on qualifying installs.

What's included

  • In-house cabinetry designer who plans the layout with you, drawer by drawer
  • Kitchen cabinets and bathroom vanities customized for size, finish and hardware
  • Knobs and pulls chosen to suit the door style and the room
  • Countertops and backsplash available from the same team when you are ready
  • First-quality product only, never discontinued lines you cannot match later
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
  • 0% financing options for 12, 24, 36, 48 or 60 months with approved credit
Kitchen & Bath Cabinets in Angier

Built for Angier homes.

Angier calls itself the Town of Crepe Myrtles, a name that goes back to the Angier Woman's Club planting them along the roads in the 1930s. It sits mostly in northern Harnett County, with a sliver in Wake, where NC 55 crosses NC 210. The town has grown fast since 2020, and new subdivisions now ring the older downtown. Whether your house is new or decades old, we can help with flooring in Angier, NC.

Angier was founded in the late 1880s and named for the Angier family of Durham. It sits where NC 55 and NC 210 cross, about 7 miles south of Fuquay-Varina and 10 miles west of I-40, mostly in northern Harnett County with a small piece in Wake. The crepe myrtles came in the 1930s, when the Angier Woman's Club planted them along the roadways, and the Crepe Myrtle Festival now draws about 20,000 visitors a year.

For a long time Angier stayed small. The 2020 census counted 5,265 people. Then it took off: the state budget office, using Census estimates, lists Angier among the fastest-growing municipalities in the country, up 55 percent between April 2020 and July 2024. Neighborhoods like Amary Meadows, which dates to 2002, Weatherford near the Johnston, Harnett and Wake line, and newer ones like Neill's Pointe and Spring Village make up much of that growth.

So most of the flooring we do in Angier is in fairly new homes. The pattern is familiar. The builder put carpet in the living room and bedrooms and vinyl in the wet areas, and after a few years of kids, dogs and red clay coming in from the yard, the owners want something tougher. Luxury vinyl plank usually wins for the main floor. For bedrooms, carpet is still a good choice, especially with a better pad underneath. For an entry or mudroom that takes the brunt of the clay, porcelain tile cleans up the easiest.

There are older houses near downtown and farmhouses out in the county as well, and those bring their own checks. A house on a crawlspace in this climate can see real moisture swings, which show up as cupped boards in summer and gaps in winter. We look at the crawlspace, the vapor barrier and how level the floor is before recommending solid hardwood. If the original floor is worth saving, we offer hardwood refinishing. If the subfloor is not cooperating, engineered hardwood or LVP is the more forgiving route.

Angier is roughly half an hour from our Garner showroom, which is open by appointment. Plenty of Angier families skip the drive and book a shop-at-home visit, and if the kitchen is due for new cabinets or a countertop, our designer can plan that alongside the floors.

Recent work

Kitchen & Bath Cabinets jobs near Angier

  • White kitchen with a marble-topped island, glass pendant lights and stainless appliances
  • Elegant white kitchen with a large island, open shelving and wood floors
  • Long run of white cabinets and quartz countertops over light oak flooring
  • Gray shaker kitchen cabinets with white quartz countertops and a cobalt blue subway tile backsplash
  • Black shaker cabinets with white quartz countertops and stainless appliances in a U-shaped kitchen
  • White cabinet island with granite top on light gray plank flooring under a vaulted ceiling
  • Warm wood cabinets, a white island and crystal chandeliers over hardwood floors
  • Cream raised-panel cabinetry with a carved island and stone counters
  • Bright bathroom with a white double vanity, soaking tub and glass shower
Angier FAQs

Kitchen & Bath Cabinets in Angier, questions

What flooring stands up to red clay and muddy shoes in an Angier home?

For entries and mudrooms, porcelain tile is the easiest to keep clean. For the rest of the main floor, luxury vinyl plank holds up well and does not mind a damp mop. We can carry the same look through both areas so the house still feels connected. We will show you options at the estimate.

We are replacing the builder carpet in our Angier house. Should we keep carpet in the bedrooms?

Many people do, since carpet is warm and quiet in bedrooms. If you keep it, we include an upgraded carpet pad at no extra charge on every carpet job. Living areas and hallways usually move to luxury vinyl plank or laminate for durability.

Can we spread the cost of new floors over time?

Yes. We offer 0% financing for 12, 24, 36, 48 and 60 months with approved credit. The 0% plans carry an additional cost, and we explain exactly what that is before you decide. It works for flooring alone or for a larger kitchen or bath project.

Do you design the kitchen, or do I need to bring a plan?

You do not need a plan. Our in-house cabinetry designer measures the room and works out the layout with you: where the sink and range sit, how many drawers you want, what goes in the corners and where the trash pull-out lives. If you already have a sketch or photos of kitchens you like, bring them. We would rather start from your ideas than from a blank page.

What can I customize?

The three things people care about most: size, finish and hardware. Cabinets can be sized to the wall you have, including taller uppers and narrower vanities for tight hall baths. Finishes run from painted colors to stained wood, and the hardware is your call. Our designer will show you what each choice looks like next to your floor before anything is ordered.

Can you replace cabinets and floors in the same project?

Yes, and that is one of the main reasons people come to us. Because we do both, we can plan the order of the work so the floor and the cabinets meet properly, instead of two companies guessing about each other. We will talk through whether the new floor goes under the cabinets or up to them during the consultation, since the right answer depends on the floor type and your plans for the room.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Angier project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate