Kitchen Remodeling in Elm City, NC
Most kitchen remodels stall in the gaps between trades: the floor installer waiting on the cabinet crew, the counter template waiting on both. We close those gaps by handling the floor, the cabinets, the countertops and the backsplash ourselves. You pick everything with one set of people, see it together before you commit, and have one phone number to call while the work is underway. The only thing left for you to worry about is which backsplash you like best. Professionally installed across Elm City.
Kitchen Remodeling done right, the first time, in Elm City.
Homeowners across Elm City, NC call Southern Flooring Solutions for kitchen remodeling because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.
We install kitchen remodeling across Elm City and the surrounding area, including Wilson, Rocky Mount, Lucama, Middlesex. Financing available over 60 months on qualifying installs.
What's included
- Flooring, cabinets, countertops and backsplash from one team
- Design consultation with our in-house cabinetry designer
- Samples of floors, doors and counters brought to your home so you can see them together
- Work sequenced so the floor, cabinets and counters meet cleanly
- Lifetime labor warranty on jobs sold at the initial in-home consultation
- 0% financing options for 12, 24, 36, 48 or 60 months with approved credit
Built for Elm City homes.
Elm City was laid out in 1873 on a half-mile square of land along the Wilmington and Weldon Railroad and went by Toisnot for much of its early life. Much of the town is now a National Register district, full of frame houses and brick storefronts built between 1873 and 1930. Older homes like these deserve a careful hand. We bring samples to you and handle flooring in Elm City, NC with that in mind.
Elm City owes its existence to the railroad. In 1873 George Howard bought a half-mile square of land along the Wilmington and Weldon Railroad and sold off lots, and the railroad moved its depot from Joyner's to the new town. It was incorporated that December as Toisnot, after a swamp west of town. The name changed to Elm City in 1891, back to Toisnot in 1895, and to Elm City for good in 1913. The town sits in both Wilson and Nash counties, and the 2020 census counted 1,218 residents.
The Elm City Municipal Historic District was listed on the National Register in 1986. Its nomination describes a flat plain cut by the railroad, with roughly thirteen blocks and much of the property inside the town limits included. It has 85 contributing buildings, most built between 1873 and 1930. The Batts & Williams Store from 1884 is a three-story brick building, the tallest in town. The Elm City Bank, built in the 1920s, has a corner entrance with a tiled floor that spells out the bank's name. Most of the rest are frame houses and cottages along Main, Parker and Branch streets.
Frame houses of that age usually sit over a crawlspace, and the original floors are often still there under later carpet or vinyl. Our hardwood refinishing service can bring sound boards back to life. Floors that have settled for a century may need leveling, and thresholds between old rooms and later additions rarely line up. We look at all of that, and at the trim heights, before we price the job.
On a flat plain, water doesn't drain away quickly, and eastern North Carolina summers are humid. Moisture coming up from the crawlspace is the most common reason a wood floor cups. We check for a vapor barrier and give any new wood time to acclimate in the house before installing it. If the space under the house stays damp, engineered hardwood or luxury vinyl plank is the safer choice, and tile is a good fit for kitchens and baths.
Elm City is about an hour east of our Garner showroom, which is open by appointment. For a drive that long, our shop-at-home service makes more sense: we bring flooring and cabinet samples to your house and measure during the same visit.
Kitchen Remodeling jobs near Elm City
Kitchen Remodeling in Elm City, questions
Do you travel out to Elm City for estimates?
Yes. Our shop-at-home service brings samples to your house in Elm City, and we measure during the same visit. In-home estimates are available Monday through Friday, 9am to 3pm. If you'd like to see more products in person, our Garner showroom is open by appointment.
My old house has heart pine under the linoleum. Can it be saved?
Often it can. Heart pine is dense and holds up well, but old adhesive, nail holes and past damage vary from house to house. We'll check a section at the estimate. If the boards are sound, our hardwood refinishing service can sand and refinish them.
Can you redo the kitchen floor and cabinets in an older Elm City home?
Yes. We install kitchen cabinets, countertops and backsplash as well as flooring, and our in-house designer helps plan the layout. In older kitchens we check the floor for level first, since cabinets need a flat, solid base to sit right and doors need to hang true.
What if our plans include moving the sink or adding outlets?
Our work is the floor, the cabinets, the countertops and the backsplash. If your plans include moving a sink, adding outlets or relocating the range, bring it up at the consultation. Those changes involve other trades, and it is much easier to schedule around them when everyone knows about them at the start rather than the week the cabinets arrive.
Should the new floor go in before or after the cabinets?
It depends on the floor. Some products are meant to run under the cabinets, and some need to stop at the cabinet base so the floor can expand and contract. Floating floors such as click-together vinyl plank and laminate usually should not be pinned under heavy cabinets. Because we install both, we pick the order that suits the product you chose instead of whatever is convenient for one trade.
We have a slab foundation. Does that limit our kitchen floor options?
Plenty of Triangle homes, especially newer builds, sit on a concrete slab. It mostly rules out nailing solid hardwood directly to the floor. Luxury vinyl plank, tile, laminate and engineered hardwood all have good slab options. We check how flat the slab is and look for signs of moisture before recommending a product.
Financing for 60 months
0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.
Every floor type we install in Elm City, NC
-
Elm CityKitchen & Bath Cabinets in Elm City
Kitchen cabinets and bathroom vanities in your sizes, finishes and hardware, planned with our in-house cabinetry designer.
Learn more → -
Elm CityCountertops in Elm City
Quartz, granite and other countertops for kitchens and baths, measured to your new cabinets and finished with a matching backsplash.
Learn more → -
Elm CityLuxury Vinyl Plank in Elm City
Waterproof luxury vinyl plank for kitchens, baths and busy main floors, with the wear layer and core matched to your household.
Learn more → -
Elm CityHardwood Flooring in Elm City
Solid and engineered hardwood chosen for your subfloor and installed for North Carolina humidity, so it stays flat and tight.
Learn more → -
Elm CityWaterproof Flooring in Elm City
Waterproof vinyl plank, water-resistant laminate and porcelain tile for kitchens, baths, laundry rooms and slab homes.
Learn more → -
Elm CityBathroom Remodeling in Elm City
Tile showers, bathroom floors, vanities, countertops and backsplash from one team, planned together so the room works as well as it looks.
Learn more →
Kitchen Remodeling in nearby areas
Ready to start your Elm City project?
Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.









