Tile in Angier, NC
Tile is the most durable surface you can put in a house, and also the least forgiving of a rushed job. A crooked layout, a thin spot in the mortar or a floor that flexes underneath will show up as lippage, hollow tiles or cracked grout. We install ceramic, porcelain, glass and natural stone tile on floors, in showers and on backsplashes, and we spend as much time on the layout and the base as on setting the tile itself. The result is a surface you do not have to think about. Professionally installed across Angier.
Tile done right, the first time, in Angier.
Homeowners across Angier, NC call Southern Flooring Solutions for tile because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.
We install tile across Angier and the surrounding area, including Fuquay-Varina, Holly Springs, Benson, Dunn. Financing available over 60 months on qualifying installs.
What's included
- Ceramic, porcelain, glass and natural stone tile
- Floors, shower walls, tub surrounds and kitchen backsplashes
- Layout planned around the room's focal points and doorways
- Large-format and wood-look porcelain installed on a flat, prepared base
- First-quality product only, so extra tile can still be matched later
- Lifetime labor warranty on jobs sold at the initial in-home consultation
Built for Angier homes.
Angier calls itself the Town of Crepe Myrtles, a name that goes back to the Angier Woman's Club planting them along the roads in the 1930s. It sits mostly in northern Harnett County, with a sliver in Wake, where NC 55 crosses NC 210. The town has grown fast since 2020, and new subdivisions now ring the older downtown. Whether your house is new or decades old, we can help with flooring in Angier, NC.
Angier was founded in the late 1880s and named for the Angier family of Durham. It sits where NC 55 and NC 210 cross, about 7 miles south of Fuquay-Varina and 10 miles west of I-40, mostly in northern Harnett County with a small piece in Wake. The crepe myrtles came in the 1930s, when the Angier Woman's Club planted them along the roadways, and the Crepe Myrtle Festival now draws about 20,000 visitors a year.
For a long time Angier stayed small. The 2020 census counted 5,265 people. Then it took off: the state budget office, using Census estimates, lists Angier among the fastest-growing municipalities in the country, up 55 percent between April 2020 and July 2024. Neighborhoods like Amary Meadows, which dates to 2002, Weatherford near the Johnston, Harnett and Wake line, and newer ones like Neill's Pointe and Spring Village make up much of that growth.
So most of the flooring we do in Angier is in fairly new homes. The pattern is familiar. The builder put carpet in the living room and bedrooms and vinyl in the wet areas, and after a few years of kids, dogs and red clay coming in from the yard, the owners want something tougher. Luxury vinyl plank usually wins for the main floor. For bedrooms, carpet is still a good choice, especially with a better pad underneath. For an entry or mudroom that takes the brunt of the clay, porcelain tile cleans up the easiest.
There are older houses near downtown and farmhouses out in the county as well, and those bring their own checks. A house on a crawlspace in this climate can see real moisture swings, which show up as cupped boards in summer and gaps in winter. We look at the crawlspace, the vapor barrier and how level the floor is before recommending solid hardwood. If the original floor is worth saving, we offer hardwood refinishing. If the subfloor is not cooperating, engineered hardwood or LVP is the more forgiving route.
Angier is roughly half an hour from our Garner showroom, which is open by appointment. Plenty of Angier families skip the drive and book a shop-at-home visit, and if the kitchen is due for new cabinets or a countertop, our designer can plan that alongside the floors.
Tile jobs near Angier
Tile in Angier, questions
What flooring stands up to red clay and muddy shoes in an Angier home?
For entries and mudrooms, porcelain tile is the easiest to keep clean. For the rest of the main floor, luxury vinyl plank holds up well and does not mind a damp mop. We can carry the same look through both areas so the house still feels connected. We will show you options at the estimate.
We are replacing the builder carpet in our Angier house. Should we keep carpet in the bedrooms?
Many people do, since carpet is warm and quiet in bedrooms. If you keep it, we include an upgraded carpet pad at no extra charge on every carpet job. Living areas and hallways usually move to luxury vinyl plank or laminate for durability.
Can we spread the cost of new floors over time?
Yes. We offer 0% financing for 12, 24, 36, 48 and 60 months with approved credit. The 0% plans carry an additional cost, and we explain exactly what that is before you decide. It works for flooring alone or for a larger kitchen or bath project.
Ceramic or porcelain: what is the difference?
Both are fired clay. Porcelain is denser and absorbs less water, which makes it the better choice for floors, showers and anywhere it may freeze. Ceramic is a little softer and easier to cut, and it is a fine choice for walls and backsplashes. In practice, most floor tile we install today is porcelain, and ceramic shows up more often on walls.
Can tile go over a wood subfloor above a crawlspace?
Yes, but the floor has to be stiff enough. Tile and grout do not bend, so a subfloor that flexes when you walk on it will crack them. Over a crawlspace we check for bounce and soft spots and use the underlayment the tile and setting materials require. Large or natural stone tiles need an even stiffer floor than standard ceramic.
Is tile too cold or hard for a family room?
It is harder and cooler than wood or carpet, which some families love in a North Carolina summer and dislike on a January morning. Area rugs soften it in living spaces. If you like the look of wood but want tile's durability, wood-look porcelain plank is worth a look, and luxury vinyl plank is a softer alternative we can show you side by side.
Financing for 60 months
0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.
Every floor type we install in Angier, NC
-
AngierKitchen & Bath Cabinets in Angier
Kitchen cabinets and bathroom vanities in your sizes, finishes and hardware, planned with our in-house cabinetry designer.
Learn more → -
AngierCountertops in Angier
Quartz, granite and other countertops for kitchens and baths, measured to your new cabinets and finished with a matching backsplash.
Learn more → -
AngierLuxury Vinyl Plank in Angier
Waterproof luxury vinyl plank for kitchens, baths and busy main floors, with the wear layer and core matched to your household.
Learn more → -
AngierHardwood Flooring in Angier
Solid and engineered hardwood chosen for your subfloor and installed for North Carolina humidity, so it stays flat and tight.
Learn more → -
AngierWaterproof Flooring in Angier
Waterproof vinyl plank, water-resistant laminate and porcelain tile for kitchens, baths, laundry rooms and slab homes.
Learn more → -
AngierKitchen Remodeling in Angier
Floors, cabinets, countertops and backsplash for your kitchen, chosen together and installed by one team, so every piece fits the one next to it.
Learn more →
Tile in nearby areas
Ready to start your Angier project?
Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.








