Skip to content
Hardwood Refinishing, Garner, NC

Hardwood Refinishing in Garner, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Garner.

Hardwood Refinishing installed in Garner, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Garner

Hardwood Refinishing done right, the first time, in Garner.

Homeowners across Garner, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Garner and the surrounding area, including Raleigh, Knightdale, Clayton, Cary. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Garner

Built for Garner homes.

Garner started as a stop on the North Carolina Railroad and is now a town of more than 31,000 people just south of Raleigh. It has a historic downtown, White Deer Park on the shore of Lake Benson, and new subdivisions filling in around the edges. It is also home for us. Our showroom is on Pisgah Drive and we belong to the Garner Chamber of Commerce. When you shop for flooring in Garner, NC, you are working with neighbors.

Garner grew up around a wood-and-water stop on the North Carolina Railroad, which was built through here in the 1850s. Garner's Station got a post office in 1878 and a town charter in 1883, lost that charter in 1891, and came back as the Town of Garner in 1905. Today it sits just south of Raleigh in Wake County, with I-40 along its north and east sides and US 70 carrying most of its business. The 2020 census counted 31,159 people, up 21 percent from 2010. It is also where we work. Our showroom is at 101 Pisgah Drive, and we are members of the Garner Chamber of Commerce.

The town has three layers of housing. The Downtown Garner Historic District covers about 44 acres along Garner Road and Main Street, with 62 contributing buildings from about 1883 to 1940 in Queen Anne, Classical Revival and Craftsman bungalow styles. The 1923 Garner High School there is now the Garner Performing Arts Center. Around it are older, established streets off US 70 with mature yards, and farther out are newer subdivisions and townhomes, many with phases still being built.

Each layer brings its own floor problems. In the older houses we often find oak hardwood under wall-to-wall carpet, and a sanding and refinish can bring it back for far less than a new floor. Those same houses usually sit on crawlspaces, and after decades some floors have settled out of level. We check for that at the estimate so any subfloor work is planned, not discovered halfway through. In the newer homes, the usual story is builder-grade carpet and thin vinyl that has worn out in a few years, often replaced with luxury vinyl plank that shrugs off the red clay that comes in on boots and paws.

Humidity is the thread that runs through all of it. A 2002 Advanced Energy study of North Carolina houses found that vented crawlspaces tracked outdoor humidity all summer, while sealed ones stayed under 60 percent. Solid hardwood over a damp crawlspace can cup in August and gap in January. So we check moisture, let wood acclimate inside the house before it goes down, and sometimes recommend engineered hardwood or LVP instead.

For Garner homeowners the showroom is a short drive. Visits are by appointment, Monday through Friday, and you can look at flooring, cabinets, countertops and backsplash in one room with our in-house cabinet designer. Or we can bring samples to your door with shop-at-home.

Recent work

Hardwood Refinishing jobs near Garner

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Drum sander taking a worn hardwood floor back to bare wood
  • Stain being wiped onto freshly sanded hardwood boards
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Garner FAQs

Hardwood Refinishing in Garner, questions

Can I just stop by your Garner showroom?

The showroom at 101 Pisgah Drive is open by appointment only, so someone is there to walk you through flooring, cabinets and countertops without rushing. Office hours are Monday to Friday, 8am to 5pm. Call (984) 200-9641 to set a time, or ask for shop-at-home and we'll bring samples to your house instead.

There's oak under the carpet in my older Garner house. Is it worth saving?

Often it is. Hardwood refinishing is one of our services. We pull back a corner, check how much wood is left above the tongue, and look for water damage and old pet stains. Then we tell you plainly whether sanding and refinishing makes sense, or whether new hardwood or luxury vinyl plank is the better use of your money.

Can you do our kitchen cabinets and floors at the same time?

Yes. Cabinets and countertops are a big part of what we do, and our in-house designer handles the cabinet layout. Flooring, cabinets, countertops and backsplash can all come from one team on one schedule, which saves you from coordinating separate trades. We can show you everything together at the Garner showroom by appointment.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Garner project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate