Skip to content
Hardwood Refinishing, Morrisville, NC

Hardwood Refinishing in Morrisville, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Morrisville.

Hardwood Refinishing installed in Morrisville, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Morrisville

Hardwood Refinishing done right, the first time, in Morrisville.

Homeowners across Morrisville, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Morrisville and the surrounding area, including Cary, Apex, Raleigh, Holly Springs. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Morrisville

Built for Morrisville homes.

Morrisville sits between Raleigh and Durham, right next to Research Triangle Park and just south of RDU airport. It is an old railroad town that grew enormously in the 2000s, and people here call it the little India of North Carolina for its tech-driven diversity. Most homes are townhomes and subdivisions from the last 30 years, in places like Preston, Breckenridge and Kitts Creek. Flooring in Morrisville, NC is mostly about refreshing those newer homes.

Morrisville takes its name from Jeremiah Morris, who gave the North Carolina Railroad land for a depot in 1852. In April 1865, Union cavalry skirmished with retreating Confederate troops at Morrisville Station. The town was chartered in 1875, gave up its charter in 1933 and got it back in 1947. The Morrisville Christian Church is one of its buildings on the National Register.

Location explains the rest. Morrisville sits between Raleigh and Durham, next to Research Triangle Park, with RDU airport just to the north. Its population grew 256.7 percent from 2000 to 2010, then from 18,576 to 29,630 by the 2020 census. Church Street Park even has a cricket pitch. Nearly all of the housing is recent: large subdivisions like Breckenridge, with more than 1,100 homes, golf-course homes in Preston, Kitts Creek and Carpenter Village, and plenty of townhomes and apartments.

With housing this new, the common jobs are replacements, not restorations. Many homes still have the carpet and sheet vinyl they were built with, and owners want something that lasts longer. Luxury vinyl plank is the usual answer for main floors, with tile in baths and laundry rooms. In townhomes that share walls or sit over another unit, it is worth checking the HOA rules on underlayment and sound before choosing a floor. We can walk through that with you at the estimate.

Newer does not mean free of moisture issues. Homes on crawlspaces in this climate can see damp air under the floor all summer, since North Carolina research found vented crawlspaces track outdoor humidity. Solid hardwood can cup in those conditions, so we test moisture, acclimate wood inside the home, and often suggest engineered hardwood for anyone who wants real wood on a crawlspace. Red clay from yards and construction sites around town is another reason families lean toward floors that clean easily.

Morrisville is about 18 miles northwest of our Garner showroom, mostly on I-40. Visits are by appointment. With shop-at-home, we bring samples to you instead, which is handy for busy schedules. If a kitchen refresh is in the plan, our in-house designer can show you cabinets and countertops too.

Recent work

Hardwood Refinishing jobs near Morrisville

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Drum sander taking a worn hardwood floor back to bare wood
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Morrisville FAQs

Hardwood Refinishing in Morrisville, questions

What flooring works in a Morrisville townhome with neighbors below or beside us?

Luxury vinyl plank with a good underlayment is a common pick, since it cuts down on footstep noise and handles daily wear. Check your HOA rules first, because some associations set sound requirements for shared-wall homes. We install underlayment as part of the job and can help you match the product to what your HOA asks for.

Do you install flooring in offices and businesses near RTP?

Yes. Commercial installations are part of our work, along with residential. For offices, common choices are commercial-grade luxury vinyl plank or tile, and carpet in quieter areas. We can look at the space, talk through traffic and scheduling, and give you an estimate. Call (984) 200-9641 to set up a visit.

Can you replace our floors around a busy work and travel schedule?

We'll do our best. Shop-at-home means we bring samples to you, and in-home estimates run Monday to Friday, 9am to 3pm. We handle floor removal and carpet disposal, and we'll set the install date with you ahead of time and walk you through what to expect on each day of the job.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Morrisville project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate