Skip to content
Laminate, Elm City, NC

Laminate in Elm City, NC

Laminate is the floor we suggest when a family wants the look of wood, a surface that stands up to claws and toys, and a sensible budget. Modern laminate is a long way from the hollow, plasticky floors of the past. Today's better products have realistic textures, a hard wear layer that resists scratches better than many vinyl planks, and water-resistant cores that handle everyday spills. We will show you where laminate shines and be honest about where another floor would serve you better. Professionally installed across Elm City.

Laminate installed in Elm City, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Elm City

Laminate done right, the first time, in Elm City.

Homeowners across Elm City, NC call Southern Flooring Solutions for laminate because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install laminate across Elm City and the surrounding area, including Wilson, Rocky Mount, Lucama, Middlesex. Financing available over 60 months on qualifying installs.

What's included

  • Wood-look laminate in a range of colors, widths and textures
  • Water-resistant laminate options for kitchens and main living areas
  • Underlayment chosen to reduce noise and smooth out minor subfloor variation
  • Removal of old carpet or flooring before installation
  • Shop-at-home samples brought to your door
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Laminate in Elm City

Built for Elm City homes.

Elm City was laid out in 1873 on a half-mile square of land along the Wilmington and Weldon Railroad and went by Toisnot for much of its early life. Much of the town is now a National Register district, full of frame houses and brick storefronts built between 1873 and 1930. Older homes like these deserve a careful hand. We bring samples to you and handle flooring in Elm City, NC with that in mind.

Elm City owes its existence to the railroad. In 1873 George Howard bought a half-mile square of land along the Wilmington and Weldon Railroad and sold off lots, and the railroad moved its depot from Joyner's to the new town. It was incorporated that December as Toisnot, after a swamp west of town. The name changed to Elm City in 1891, back to Toisnot in 1895, and to Elm City for good in 1913. The town sits in both Wilson and Nash counties, and the 2020 census counted 1,218 residents.

The Elm City Municipal Historic District was listed on the National Register in 1986. Its nomination describes a flat plain cut by the railroad, with roughly thirteen blocks and much of the property inside the town limits included. It has 85 contributing buildings, most built between 1873 and 1930. The Batts & Williams Store from 1884 is a three-story brick building, the tallest in town. The Elm City Bank, built in the 1920s, has a corner entrance with a tiled floor that spells out the bank's name. Most of the rest are frame houses and cottages along Main, Parker and Branch streets.

Frame houses of that age usually sit over a crawlspace, and the original floors are often still there under later carpet or vinyl. Our hardwood refinishing service can bring sound boards back to life. Floors that have settled for a century may need leveling, and thresholds between old rooms and later additions rarely line up. We look at all of that, and at the trim heights, before we price the job.

On a flat plain, water doesn't drain away quickly, and eastern North Carolina summers are humid. Moisture coming up from the crawlspace is the most common reason a wood floor cups. We check for a vapor barrier and give any new wood time to acclimate in the house before installing it. If the space under the house stays damp, engineered hardwood or luxury vinyl plank is the safer choice, and tile is a good fit for kitchens and baths.

Elm City is about an hour east of our Garner showroom, which is open by appointment. For a drive that long, our shop-at-home service makes more sense: we bring flooring and cabinet samples to your house and measure during the same visit.

Recent work

Laminate jobs near Elm City

  • Modern living room with chevron wood-look flooring and a marble feature wall
  • Open kitchen and living room with gray wood-look laminate flooring
  • Clean white kitchen with gray wood-look plank flooring
  • Living room and office before and after: old flooring replaced with dark wood-look plank
  • Kitchen and living area before and after: glossy old floor replaced with matte wood-look plank flooring
  • Sunroom floor replacement shown before, during demolition, after demolition and finished with dark plank flooring
Elm City FAQs

Laminate in Elm City, questions

Do you travel out to Elm City for estimates?

Yes. Our shop-at-home service brings samples to your house in Elm City, and we measure during the same visit. In-home estimates are available Monday through Friday, 9am to 3pm. If you'd like to see more products in person, our Garner showroom is open by appointment.

My old house has heart pine under the linoleum. Can it be saved?

Often it can. Heart pine is dense and holds up well, but old adhesive, nail holes and past damage vary from house to house. We'll check a section at the estimate. If the boards are sound, our hardwood refinishing service can sand and refinish them.

Can you redo the kitchen floor and cabinets in an older Elm City home?

Yes. We install kitchen cabinets, countertops and backsplash as well as flooring, and our in-house designer helps plan the layout. In older kitchens we check the floor for level first, since cabinets need a flat, solid base to sit right and doors need to hang true.

Laminate or luxury vinyl plank: which is better?

It depends on the room. Laminate's top layer is usually harder, so it tends to resist scratches from dog claws and chair legs better. Luxury vinyl plank handles standing water better, so it usually wins in full bathrooms and laundry rooms. In bedrooms, living rooms and hallways, both work well. We sell both, so we have no reason to push one, and we will put them side by side in your home.

Can laminate go in a kitchen?

Water-resistant laminate can, as long as spills are wiped up within a reasonable time. Its core is wood-based, so standing water left for hours, like a slow dishwasher leak, can still damage it. If your kitchen sees a lot of water, or you want a floor that can go in a full bath as well, waterproof vinyl plank may be the safer choice.

Does laminate sound hollow?

Cheaper laminate over a thin pad can sound clicky. A good underlayment, a thicker plank and a flat subfloor make a big difference. Many products now come with an attached pad. If you are upstairs above a living room, ask us about sound-reducing underlayment, because the people downstairs will notice.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Elm City project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate