Skip to content
Hardwood Refinishing, Benson, NC

Hardwood Refinishing in Benson, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Benson.

Hardwood Refinishing installed in Benson, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Benson

Hardwood Refinishing done right, the first time, in Benson.

Homeowners across Benson, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Benson and the surrounding area, including Dunn, Angier, Smithfield, Selma. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Benson

Built for Benson homes.

Benson grew from a 402-acre tract that Alfred Monroe "Mim" Benson bought along the Smithfield-Fayetteville Road in 1874. The railroad came through in 1886, the town incorporated the next year, and today it sits where I-95 meets I-40. Mule Days and the Singing Grove keep the small-town calendar full, and the farmland around town is dotted with old homeplaces. When it comes to flooring in Benson, NC, we see everything from early 1900s bungalows to brand-new builds.

Mim Benson bought 402 acres along the Smithfield-Fayetteville Road in 1874 and sold off parcels in the 1880s, many of them to farmers. A railroad line came through in 1886 and Benson incorporated in 1887. The town counted 3,967 residents in 2020, up nearly 20 percent from 2010, and it sits at a useful spot: I-95 runs along the southeast side of town and I-40 passes to the northeast.

Benson is best known for two gatherings. Mule Days fills the fourth Saturday of September and draws more than 60,000 people. The Singing Grove, a two-acre park downtown, has hosted the State Singing Convention since 1922. The Benson Historic District, listed in 1985, covers about 53 acres along Main and Church Streets with 104 contributing buildings from roughly 1900 to 1930, including the Farmers Commercial Bank of 1921 and the Carolina-Parrish Hotel of about 1918.

For flooring, Benson homes split three ways. In town, many houses date from the early 1900s, and homes of that age typically sit on piers or crawlspaces. Out in the country around McGee's Crossroads, Meadow and Stancils Chapel, there are farmhouses that have been added onto more than once, so one room can sit higher than the next and floors may run in different directions. And on the edges of town there are newer homes on slabs, often still carrying the builder's carpet and vinyl.

Each one asks for a different plan. With older frame houses, we start under the house: is the vapor barrier intact, is the ground wet, are any joists sagging? Humid summers can push moisture up into the boards and cause cupping, and dry winters open gaps. If the original wood is sound, hardwood refinishing may be all it needs. Where the subfloor is uneven or the crawlspace stays damp, engineered hardwood or luxury vinyl plank is the safer choice. In farm country, red clay and muddy boots are part of life, so a tile or LVP entry earns its keep.

Benson is about 24 miles south of Garner, roughly a half-hour run up I-40 to our showroom, which is open by appointment. If you would rather stay home, we bring samples to you, and our in-house designer can look at kitchen cabinets on the same visit.

Recent work

Hardwood Refinishing jobs near Benson

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Benson FAQs

Hardwood Refinishing in Benson, questions

Our farmhouse outside Benson has floors that slope from room to room. Can you still put in new flooring?

Yes, but the prep matters. We check the joists and subfloor at the estimate and plan any leveling or repairs before we price the job. On uneven older floors, luxury vinyl plank and engineered hardwood are usually more forgiving than solid boards, and we will tell you what we find.

What carpet do you recommend for bedrooms in a Benson home?

It depends on traffic and pets, so we bring several styles and fibers to the house. Whatever you choose, every carpet job we do includes an upgraded carpet pad at no extra charge, and we handle removal and disposal of the old carpet.

Is Benson too far out for an in-home estimate?

No. Benson is part of our regular service area. We schedule in-home estimates Monday through Friday between 9am and 3pm and bring samples with us. Jobs sold at that first in-home consultation come with our lifetime labor warranty. If you would rather see a full display first, you can also book a time at our Garner showroom.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Benson project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate