Skip to content
Hardwood Refinishing, Selma, NC

Hardwood Refinishing in Selma, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Selma.

Hardwood Refinishing installed in Selma, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Selma

Hardwood Refinishing done right, the first time, in Selma.

Homeowners across Selma, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Selma and the surrounding area, including Smithfield, Clayton, Lucama, Wendell. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Selma

Built for Selma homes.

Selma started on May 1, 1867, when lots were sold around a new station on the North Carolina Railroad. Trains still stop at the 1924 Union Depot, and the streets around it hold antique shops, the Rudy Theatre and blocks of older homes in West Selma. Plenty of those houses have original wood floors with a lot of life left. We bring that same care to every job involving flooring in Selma, NC, old house or new.

Selma has been a railroad town from the first day. Lots were sold around a new North Carolina Railroad station on May 1, 1867, and the town was chartered on February 11, 1873. Mitchener Station, built in 1855, is thought to be the oldest surviving train station in the state. The 1924 Union Depot downtown has been renovated and still sees Amtrak trains, and CSX and Norfolk Southern run freight through. The 2020 census counted 6,317 residents.

What that history left behind is a lot of old houses. The West Selma Historic District, listed on the National Register in 2011, is a mostly residential area with 217 contributing buildings built between about 1880 and 1961, in styles from Queen Anne and Gothic Revival to Craftsman bungalows and Moderne. The Downtown Selma Historic District, listed in 2010, adds 59 more buildings along Raiford, Anderson, Waddell and Railroad Streets, dating from about 1875 to 1960.

Old houses near a rail line come with a few predictable things. Floors settle over the decades and run a little out of level. Original heart pine or oak is often hiding under one or two layers of later flooring, sometimes linoleum glued right to the boards. We can handle floor removal and demo, then decide with you whether the wood underneath is worth hardwood refinishing. Many of these homes sit on crawlspaces, so we check for moisture and a vapor barrier first, because a damp crawlspace in a Johnston County summer is the most common reason wood floors cup.

Downtown storefronts are their own category. Downtown Selma is known for its antique stores and small shops, and owners there ask about commercial flooring that can take foot traffic without losing the look of an old building. Tile and commercial-grade luxury vinyl both work well, and we can match transitions to existing thresholds.

Newer subdivisions such as Emily Gardens, minutes from I-95 and the future I-42, are a different job. In new construction the usual upgrade is replacing builder carpet and vinyl with LVP that stands up to red clay tracked in from a new lawn. Selma is about 30 minutes east of our Garner showroom along US 70, and the showroom is open by appointment. Our shop-at-home visits cover Selma too, cabinets and countertops included.

Recent work

Hardwood Refinishing jobs near Selma

  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Drum sander taking a worn hardwood floor back to bare wood
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Selma FAQs

Hardwood Refinishing in Selma, questions

There is old linoleum glued over the wood floors in our Selma house. Can you get it up?

Usually, yes. Our floor removal and demo crew takes up the old layers and the adhesive, then we look at what is left. If the boards are sound, hardwood refinishing can bring them back. If not, we plan a new floor and haul the old material away.

Do you install flooring in downtown Selma storefronts?

Yes. We do commercial installations as well as homes. For a shop with steady foot traffic we usually suggest commercial-grade luxury vinyl or tile. We will look at the existing thresholds and subfloor so the new floor fits an older building without awkward height changes.

Can you redo the stairs in an older Selma home to match new floors?

Our stairs and trim work covers new treads, risers, nosing and baseboards. In an older house we check how the stairs have settled first. Matching new flooring to the stairs keeps the look consistent from the front door up to the bedrooms.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Selma project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate