Skip to content
Hardwood Refinishing, Sanford, NC

Hardwood Refinishing in Sanford, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Sanford.

Hardwood Refinishing installed in Sanford, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Sanford

Hardwood Refinishing done right, the first time, in Sanford.

Homeowners across Sanford, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Sanford and the surrounding area, including Fuquay-Varina, Holly Springs, Angier, Apex. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Sanford

Built for Sanford homes.

Sanford grew up as a railroad and brick town, and in 1959 its kilns made a tenth of the bricks in the country. Today it has five National Register historic districts, from the downtown storefronts to the tree-lined streets of Rosemount-McIver Park, along with large new neighborhoods such as Galvin's Ridge. We work in both old and new homes, and we bring the samples to you, so choosing flooring in Sanford, NC does not mean a long drive.

Sanford was incorporated in 1874 and named for C.O. Sanford, a civil engineer for the railroad. When Lee County was formed in 1907, Sanford became its seat, and in 1947 it merged with Jonesboro, which became Jonesboro Heights. Clay was the other big business. By 1959 the city was making about 10 percent of the bricks produced in the United States, which earned it the name Brick Capital of the USA. The 2020 census counted 30,261 people.

Five historic districts are on the National Register. Downtown covers 38 acres with 53 contributing buildings, most from about 1895 to 1930, including the Temple Theatre, built in 1925. Rosemount-McIver Park spans about 80 acres and 169 contributing buildings, largely Queen Anne, Colonial Revival and Tudor Revival homes from 1900 to the early 1940s. East Sanford adds 135 more, dated from 1894 to 1960. Hawkins Avenue and Lee Avenue complete the list.

Houses from those decades were built with solid wood floors, usually oak and sometimes pine, and many still have them under carpet or old vinyl. Hardwood refinishing is often the right call, and we will tell you plainly if the boards are too thin or too damaged to sand again. These homes mostly sit on crawlspaces, and Piedmont summers are humid, so we test moisture and let new wood acclimate inside the house before it goes down. Where a floor has settled, we plan the leveling before installation day.

The other Sanford is brand new. Galvin's Ridge, a 427-acre community planned for 1,000 homes along Colon Road, broke ground in 2020. Together with Laurel Oaks and other projects it was expected to add more than 2,000 housing units, the largest residential build-out in Lee County's history. Those homes usually come with builder-grade carpet and vinyl. Luxury vinyl plank, laminate and engineered hardwood are common upgrades, and many kitchens get new cabinets and countertops at the same time.

Sanford is a little under an hour southwest of our Garner showroom, which is open by appointment. Most Sanford customers never need to make the trip. With shop-at-home, we bring flooring, cabinet and countertop samples to your house, take measurements at the in-home consultation, and walk through the options in the rooms where they will go.

Recent work

Hardwood Refinishing jobs near Sanford

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Sanford FAQs

Hardwood Refinishing in Sanford, questions

Our older Sanford house has dark stains in the hardwood. Can those be sanded out?

Some can. Surface marks and worn finish usually sand away. Deep pet or water stains often go all the way through the board, and those boards need to be cut out and replaced with matching wood before refinishing. We look at each stain at the in-home consultation and tell you which approach makes sense for your floor.

We bought a new home in Galvin's Ridge. Laminate or luxury vinyl plank?

Both look like wood and both resist scratches well. Luxury vinyl plank handles water better, so it is the safer pick for kitchens, baths and laundry rooms. Many laminates now have water-resistant cores and a more solid feel underfoot. We bring samples of both to your house so you can compare them side by side.

Do you install kitchen cabinets in Sanford, or only floors?

We do both. Cabinets are a big part of our work, and our in-house designer handles the layout, sizes, finishes and hardware. We also install countertops and backsplash. Doing the kitchen and the floors with one team keeps the schedule simple and avoids gaps where the old cabinets used to sit.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Sanford project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate