Skip to content
Hardwood Refinishing, Wilson, NC

Hardwood Refinishing in Wilson, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Wilson.

Hardwood Refinishing installed in Wilson, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Wilson

Hardwood Refinishing done right, the first time, in Wilson.

Homeowners across Wilson, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Wilson and the surrounding area, including Elm City, Lucama, Rocky Mount, Middlesex. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Wilson

Built for Wilson homes.

Wilson built its name on tobacco warehouses and the money they brought into town. That money went into the houses along West Nash Street, in Old Wilson and across East Wilson, many of them more than a century old. Newer subdivisions to the northwest added a different kind of house. Whether you have heart pine under old carpet or builder-grade vinyl in a newer kitchen, we handle flooring in Wilson, NC from start to finish.

There are really two Wilsons when it comes to floors. One is the older town that grew up around the tobacco warehouses downtown. The other is the ring of subdivisions that pushed the population up by more than 40 percent between 1990 and 2010, with most of the new shopping on the northwest side. The 2020 census counted 47,851 people in the city.

The older town is large. The Old Wilson Historic District covers 164 acres and listed 263 contributing buildings when it went on the National Register in 1984, with work dating back to 1853. The West Nash Street district filled in during the 1910s and 1920s with Colonial Revival houses and bungalows. Broad-Kenan Streets has 293 buildings from about 1890 to 1940. East Wilson, historically the city's African American neighborhood, has 858 contributing buildings from the same period, from Queen Anne houses to shotgun houses. The downtown Central Business-Tobacco Warehouse district holds the warehouses that once made Wilson the place to sell tobacco.

Houses from those years usually sit over a crawlspace, and many still have their first wood floors. We offer hardwood refinishing, so if the boards are sound we'll sand and refinish them rather than tear them out. Where floors have sagged or an old addition sits at a different height, we plan the leveling and transitions before we price the job. Eastern North Carolina humidity makes solid wood swell in summer and gap in winter, so we let new wood acclimate in the house and check the moisture under the floor first. If the crawlspace runs damp, engineered hardwood or luxury vinyl plank is the safer choice.

The newer neighborhoods bring a different request. Many of those homes came with builder-grade carpet and sheet vinyl that is now worn or dated. Replacing it with luxury vinyl plank, hardwood or new carpet on an upgraded pad is one of the most common jobs we do, and stairs and trim can be updated at the same time.

Wilson is roughly 50 minutes east of our Garner showroom, mostly by US 264. The showroom is open by appointment, but most Wilson customers let us come to them with shop-at-home samples. Our in-house designer can also plan kitchen cabinets, countertops and backsplash for the same house.

Recent work

Hardwood Refinishing jobs near Wilson

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Open living space with a white fireplace, staircase and medium oak hardwood
  • Drum sander taking a worn hardwood floor back to bare wood
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Wilson FAQs

Hardwood Refinishing in Wilson, questions

My house in Old Wilson has wood floors under the carpet. Is it worth refinishing?

Usually it is, as long as the boards are thick enough to sand and the damage is limited. Our hardwood refinishing service can bring back floors that have been covered for decades. We'll pull up a corner at the estimate, look at what's there, and tell you whether refinishing or new flooring makes more sense.

What should replace the builder-grade carpet in my newer Wilson home?

It depends on the room. Luxury vinyl plank works well in kitchens, baths and busy living areas because it is waterproof and easy to clean. Many families keep carpet in bedrooms, and every carpet job we do includes an upgraded pad at no extra charge.

Can you install flooring and new kitchen cabinets in the same project?

Yes. We are a one-stop shop for floors, cabinets, countertops and backsplash, and our in-house designer helps plan the kitchen layout. Doing both together means one team, one schedule, and floors and cabinets that are planned from the start to meet correctly at every toe kick and edge.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Wilson project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate