Skip to content
Hardwood Refinishing, Goldsboro, NC

Hardwood Refinishing in Goldsboro, NC

If you have hardwood under your feet, or under old carpet, you may not need a new floor at all. Solid wood can be sanded back to bare boards, stained a new color and sealed with a fresh finish. We refinish worn floors in homes across the Triangle, from builder oak in a 2000s two-story to original heart pine in an older house in Raleigh or Garner. Before any sander comes out, we look at the boards and tell you honestly whether refinishing is the right call. Professionally installed across Goldsboro.

Hardwood Refinishing installed in Goldsboro, NC by Southern Flooring Solutions
Why Southern Flooring Solutions in Goldsboro

Hardwood Refinishing done right, the first time, in Goldsboro.

Homeowners across Goldsboro, NC call Southern Flooring Solutions for hardwood refinishing because every job runs with experienced installers, clear pricing, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing across Goldsboro and the surrounding area, including Lucama, Selma, Smithfield, Wilson. Financing available over 60 months on qualifying installs.

What's included

  • Full sanding down to bare wood to remove scratches, wear and old finish
  • Help choosing a stain by seeing it on your own wood, not a photo
  • Original oak and pine floors in older homes
  • An honest call on refinish versus replace before any work starts
  • Hardwood found under old carpet assessed and brought back
  • Lifetime labor warranty on jobs sold at the initial in-home consultation
Hardwood Refinishing in Goldsboro

Built for Goldsboro homes.

Goldsboro grew where two railroads crossed, then grew again when Seymour Johnson Field opened in 1942. The Neuse River runs along its southern edge and has flooded the city more than once. Homes here range from older houses near downtown to neighborhoods that filled in as the base grew. We plan around the river, the humidity and the age of the house when we handle flooring in Goldsboro, NC.

Start with the river. The Neuse forms Goldsboro's southern boundary, the Little River runs along the west side, and Stoney Creek cuts through the east side between downtown and the air base. After Hurricane Matthew in October 2016, the Neuse crested near Goldsboro at about 29 feet, roughly 11 feet above flood stage. By late that month the city had temporarily condemned 396 homes because of flooding and storm damage.

Goldsboro itself was a railroad town first. It grew up around a hotel at the crossing of the Wilmington and Weldon Railroad and New Bern Road, was incorporated in 1847, and took over as the Wayne County seat. Seymour Johnson Field opened on the edge of town in 1942, and the city's population and businesses grew with the base from then on. The 2020 census counted 33,657 people. Older homes near downtown include National Register houses such as the Solomon and Henry Weil Houses on West Chestnut Street and the Harry Fitzhugh Lee House on West Walnut Street.

For floors, the main concern is moisture. Goldsboro has a humid subtropical climate, with July highs averaging 91 degrees and more than 52 inches of rain a year. Solid hardwood will swell and cup when it takes on moisture from a damp crawlspace, then gap when the heat runs in winter. We check moisture under the house and look at the vapor barrier before we recommend solid wood. When the conditions are borderline, engineered hardwood or luxury vinyl plank is a safer fit.

If your home has taken on water before, plan for it to happen again. We can remove wet or damaged flooring, let the subfloor dry out properly, and put down waterproof luxury vinyl plank or tile on the lower level. In older houses that stayed dry, we also offer hardwood refinishing, which can save original floors that have been hidden under carpet for years.

Goldsboro is about 50 minutes southeast of our Garner showroom by US 70. The showroom is open by appointment, and military families on a tight move-in schedule often find our shop-at-home service easier: we bring samples to the house and measure at the same visit.

Recent work

Hardwood Refinishing jobs near Goldsboro

  • Classic living room with a wood mantel fireplace and warm oak hardwood
  • Grand living room with a sweeping wood staircase and cherry-toned floors
  • Drum sander taking a worn hardwood floor back to bare wood
  • Stain being wiped onto freshly sanded hardwood boards
  • Sanded oak floor ready for finish next to an edging sander
  • Hardwood hallway and room before and after refinishing: dull worn boards sanded and refinished to a deep glossy finish
  • Dark stained hardwood floor before, and the same boards sanded back to natural light wood after
Goldsboro FAQs

Hardwood Refinishing in Goldsboro, questions

My Goldsboro house flooded during a hurricane. What flooring should go back in?

For lower floors in flood-prone areas, we recommend waterproof luxury vinyl plank or tile. Before anything new goes down, our floor removal crew takes out the damaged material so the subfloor can dry and be checked. Putting new flooring over a wet subfloor only traps the problem.

We're stationed at Seymour Johnson and on a tight schedule. Can you work around that?

We'll do our best. Our shop-at-home service brings samples to your house, and we measure at the same visit so the estimate comes quickly. In-home estimates are available Monday through Friday, 9am to 3pm. Luxury vinyl plank and carpet usually install faster than site-finished hardwood.

Is solid hardwood a good idea in Goldsboro's humidity?

It can be, if the house stays dry underneath. We check the crawlspace and vapor barrier first and let the wood acclimate inside before installing. If moisture is a concern, engineered hardwood gives you a real wood surface with more stability through the seasons.

Can my floor be refinished, or does it need replacing?

Most solid hardwood can be sanded and refinished several times. The limit is how much wood is left above the tongue. Engineered hardwood depends on the thickness of its top layer, and some thin veneers cannot be sanded at all. Deep pet stains, water damage that has turned boards black, or boards that are cupped from moisture below may need replacing. We look at the floor in person and tell you which situation you are in.

We found hardwood under our carpet. Is it worth saving?

Often it is. Many older Triangle homes had oak or pine floors covered with wall-to-wall carpet decades ago. After removal you will usually find tack strip holes along the walls, staple marks and some staining, and most of that sands out. We handle the carpet removal and disposal, look at the boards underneath, and give you a straight answer before you commit to refinishing.

How do I pick a stain color?

Stain looks different on every species and even on different boards of the same floor, so a photo or a sample chip is not reliable. The most reliable way to choose is to see samples on your own sanded boards, in your own light, and we will help you do that. Red oak, white oak and pine all take stain differently, and pine in particular can turn blotchy with dark colors.

Financing for 60 months

0% financing plans for 12, 24, 36, 48 and 60 months on approved credit. The 0% plans carry an additional cost, which we explain up front.

Apply for financing

Ready to start your Goldsboro project?

Book an in-home consultation and see samples in your own light. Lifetime labor warranty on jobs sold at the consultation.

Old vinyl tile and carpet before, replaced with dark wood-look plank flooring after
Call Now Free Estimate